Signs in Larimer County are installed and maintained on public, county maintained roadways. These signs are installed in accordance with the provisions of the Manual on Uniform Traffic Control Devices (or MUTCD). The MUTCD is the national standard governing the use of traffic signs and is in general accord with the Uniform Vehicle Code of the National Committee on Uniform Traffic Laws and Ordinances.
Signs should be used only where warranted by facts and field studies. Signs are essential where special regulations apply at specific places or at specific times only or where hazards are not self-evident. They also give information as to highway routes, directions, destinations and points of interest. Signs ordinarily are not needed to confirm rules of the road.
There are three types of signs: Regulatory, Warning, and Guide signs.
Care should be taken not to install too many signs. A conservative use of regulatory and warning signs is recommended as these signs, if used to excess, tend to lose their effectiveness.
Requests for changing or adding signs may be made through the main Engineering Department phone number (498-5700), through the mail, or through e-mail to the Traffic Section.
An engineering study is generally required for changing or adding signs. The Traffic Section of the Larimer County Engineering Department performs many of these studies as a service to the public on a time available basis for public, county maintained roadways. These studies can be quite involved for certain types of signs such as speed limits, stops, and deer crossings.